Part Drawing Intelligence May 2026 G-Code in Minutes Coming Soon
Join Waitlist

Every callout on every drawing. Extracted in seconds.

Part analysis that used to take 30 minutes of highlighter work happens in seconds. Every thread, every tolerance, every buried note — captured on the first pass. Then ask follow-up questions to dig deeper into any detail.

Sign up for early access →
Free • ∞Unlimited • Gov-Cloud Secure • ITAR Compliant • All your parts in one place • Interactive PDF viewer • 3D models without a CAD license • Download & share reports • Ask questions about your drawing • Free • ∞Unlimited • Gov-Cloud Secure • ITAR Compliant • All your parts in one place • Interactive PDF viewer • 3D models without a CAD license • Download & share reports • Ask questions about your drawing •
“
I really like it! It's breaking apart everything, and giving me detail. That to me is very helpful as a quick snapshot, where I can just work right off this page and not have to do extra manual notes as I'm digging through a print.
Tom
One Happy Estimator
Why Re:CAM

Stop reviewing drawings with a highlighter.

Manual Review Re:CAM
Drawing review Highlighter, spreadsheet, 20-30 min per part Upload a drawing, get a full breakdown in seconds
Threads & callouts Read every note, every view, transcribe manually Every thread in one table, sourced and verified
Conflict detection Hope someone catches the contradictory callout Flagged automatically before you quote or program
Secondary processes Explicit callouts only — inferred requirements missed Catches what's called out — and what's not. If a spec implies deburr, edge breaks, or pre-plating prep, we flag it.
Quality requirements Scattered across notes, title blocks, and customer docs Organized in one section — PPAP, FAI, CMM, certs
Follow-up questions Re-read the drawing, flip between views, check your notes Ask about any detail — tolerances, material, risks, machining — and get an instant, sourced answer
Consistency Depends on who reviews it and how busy they are Same thoroughness every time, every part
Cost Your time on every job, manually Free — unlimited drawings, no credit card
Security Drawings emailed, shared drives, customer portals — no audit trail Gov-Cloud secure, ITAR compliant. Your drawings and data never leave U.S. soil — no export, no third-party access.
Ditch the highlighter — join the waitlist →
How It Works

Upload a drawing. Get the full picture.

1

Upload

Drop in an engineering drawing.

Upload a PDF drawing as it comes from your customer — no special formatting required. Have a STEP file too? Drop it in for an interactive 3D view of the part alongside the analysis. Your files and shop data are yours — your data is never shared, always encrypted.

2

Analyze

Get a structured breakdown of everything that matters.

Threads, tolerances, surface finish, geometric risks, secondary processes, quality and compliance requirements — extracted, interpreted, and organized. Every extraction includes a confidence score and source reference. Ambiguities and conflicts flagged before they become problems.

3

Act

Plan with full information. Work with confidence.

Use the analysis to quote accurately, plan machining strategy, and share structured reports with programmers, quality, and the shop floor — before committing to a job. Have a question about tolerances, material, or risk? Ask directly and get answers grounded in the drawing. No more surprises after the PO is signed.

Get early access — sign up now →
What Gets Extracted May 2026

Everything on the drawing — nothing missed

Threads
Material & complexity
⌖ Tolerances
≋ Surface finish
↔ Dimensions & features
A Datums
Secondary processes
☑ Quality & compliance
★ Certifications & standards
? Conflicts & ambiguities
Med Confidence scores
✎ Notes & special instructions
⚠ Geometric risks
↺ Revision & drawing standard
✏ Part marking
Ask questions about your part
May 2026

Be first to try Part Drawing Intelligence.

We're opening early access soon. Sign up now and we'll let you know as soon as you can upload your first drawing.

Who We Are

Built for the shop floor, by people who know it.

Re:CAM is built by a team that's spent years inside manufacturing — designing industrial AI, building frontline worker tools, and publishing peer-reviewed research on how AI should work in real shops.

Bruce Kaufman
Bruce Kaufman
General Manager
Co-founded Genba AI (acquired by RealWear). Former Fluke/Fortive. UChicago Booth.
LinkedIn
Glen Williams, Ph.D.
Glen Williams, Ph.D.
Principal Scientist
Ph.D., Penn State. AI for advanced manufacturing. Former W.L. Gore engineer.
LinkedIn
Siddharth Kapoor
Siddharth Kapoor
Engineering
Full-stack & ML/AI. Former Oncospace (AI for radiation therapy). Tufts CS + Cognitive Science.
LinkedIn
Emory Sullivan
Emory Sullivan
Product
Co-founded Genba AI (acquired by RealWear). Former Fluke/Fortive and RealWear. Harvard CORe.
LinkedIn
Coming Soon

End-to-end machining programs for 3-axis parts.

Drawing intelligence is just the beginning. Re:CAM technology will soon generate complete machining strategies & simulations, G-code, and setup sheets for 3-axis prismatic parts — CAD to cut in minutes, no CAM license or deep CAM knowledge required.

⚙

No CAM seat required

Complete machining programs without a CAM license or CAM interface to learn.

▶

Full simulation review

Review every setup and operation before anything goes near your machine.

$

Pay per part

No seat fees, no annual license. Pay only for G-code you export. Drawing analysis stays free.

Sign up for early access now: